Video Baluns for Video or PTZ Over EthernetPTZBalun
Use Video Baluns or Video + Data PTZ Baluns (PTZ Cameras) Over Normal EthernetRun video wires up to 1500 ft using our video baluns. These video baluns convert normal CAT5 or CAT6 wire to a 75 OHM impedance for proper video transmission. Baluns connect to camera and VCR/TV/DVR. The PTZ baluns can also run data.
Use Cat 5 Cable for your Hard Wired CameraIf you are installing a hard wired hidden camera such as an exit sign or emergency light or even a standard CCTV camera such as an Infrared LED security camera you can use CAT5 to save you money or allow for a much cleaner install for long distances.
Because Cat 5 cable has 4 pairs of wire, you could use 4 video baluns on each end of it and run 4 video signals through one Cat 5 cable. If you are using the PTZ baluns, they run one camera per CAT 5 cable.
100% Passive - No Power Required for Baluns
Baluns are passive and require no power to operate.
Video baluns have 2 screw-down terminals to connect wire to, and a male BNC jack to connect to camera or DVR. They will only send the video signal and not the power for the camera.
The PTZ baluns have a CAT 5 jack on each end - not screw down terminals. The can be used for PTZ camera and will do it all, power, video and control wires. They can also be used for a standard CCTV camera and will transmit video as well as power.
Note: Baluns are sold in pairs. Each unit ordered is 2 baluns.
- Passive (No power required)
- Accomplish longer runs using Cat 5, up to 1500 ft.
- When running power through Cat 5 as well, the cable run distance will be reduced
- Jack already on Balun. No Cat 5 wiring required
- 1-Year Warranty