Wireless Toolbox Hidden Camera is Ready to Go
This toolbox hidden camera sends high quality color hidden video wirelessly up to 500ft to the included receiver. Toolbox must plug in for using the included cord to power transmitter and camera. Included receiver captures the wireless video and connects to your TV or DVR for viewing or recording.
Toolbox wireless hidden camera is fully weatherproof and can be used anywhere indoors or outdoors.
Just Power Up and Connect Your Receiver to TV or DVR
Wireless hidden cameras still require power. Some cameras use an AC power adapter to plug it in for power and some wire directly into 110VAC. You may also choose to use an optional rechargeable 12 volt battery on most models. To view the video, you must connect the included wireless receiver to a viewing or recording device within a couple hundred feet of the camera. You have two options for what you connect the receiver to.
- Connect the receiver to a Standalone DVR. This allow you to view, record, motion detection record, and view over the internet using your computer or smartphone.
- Connect the receiver to a TV for basic real
time viewing. This option only gives you real-time basic live viewing.
Print / Download Product Spec Sheet
|Name of Camera||SSC-106HHC Pinhole|
|Color||Day-Night Color B/W|
|Image Sensor||1/3" Color Sony Super HAD CCD II 960H|
|Lens Size||3.7 mm pinhole lens 85 degree Field of View|
|Lux||.01 LUX Color, .0001 LUX B/W|
|IR Compatible||Yes 850nm|
|IR Compatible||Optional 940-950nm|
|Curve Reproduction||Adaptive Tone Curve Reproduction|
|Effective Pixels||1020W X 508T|
|Shutter Speed||1/60 ~ 1/120,000 sec|
|S/N Ratio||More Than 45db|
|White Balance||Auto White Balance|
|Wide Dynamic Range||Yes|
|Back Light Compensation||Auto BLC|
Wireless Transmitter Specs
|Transmitter Frequency||2.400GHz – 2.4835GHz|
|Transmitter Image Processor||MPEG 4 encode/decode|
|Transmitter Transmit Power (max)||1W/FCC or 100mW/CE|
|Transmitter Video Bit Rate||up to 12 Mbps|
|Transmitter Video Output Level||1+/-0.2V p-p @ 75 ohm|
|Transmitter Audio Output Level||1+/-0.2V p-p @ 600 ohm|
|Receiver Frequency||2.400GHz – 2.4835GHz|
|Receiver Sensitivity||-80dBm min.|
|Receiver Image Processor||MPEG 4 encode/decode|
|Receiver Video Output Level||1+/-0.2V p-p @ 75 ohm|
|Receiver Audio Output Level||1+/-0.2V p-p @ 600 ohm|
Wireless transmitter and receiver
AC power supplies
Wiring to connect receiver to TV or DVR
25ft power video cable