PTZ Camera Balun

Run Video and PTZ RS-485 Over Normal Cat 5

Baluns are designed to run video and PTZ control for up to 1000ft over Cat 5 cable. Power can also be run through the baluns over Cat 5, but for shorter distances. It is always best to locally power a PTZ cameras. These baluns can be used for regular cameras by running the power and video through Cat 5 or for PTZ cameras by running the power, video, and PTZ control through Cat 5.

Utilize Existing Cat 5 Cable Installations

Using baluns allow you to send video, power, and RS-485 PTZ control through regular Cat 5. Save time and money by using regular Cat 5 cable when installing cable. No need to run separate control wire. It can all be sent through standard Cat 5 cable. Baluns allow your cameras to be installed easier using your existing wiring. Connect a PTZ to a normal Cat 5 jack and view, control, and power it from another office through the existing wiring.

These baluns convert standard cabling into twisted pair wiring. This allows easier and longer runs of cable. Run up to 1000ft of Cat 5 for your PTZ camera.

Note: These are only sold in pairs. Each quantity contains 2 (two) baluns.

Dimensions: 2" x 1/2" x 1/2" (each)

 

Features:

• Passive (No power required)
• Accomplish longer runs using Cat 5, up to 1000ft.
• When running power through Cat 5 as well, the cable run distance will be reduced
• Jack already on Balun. No Cat 5 wiring required
• 1 Year Warranty