pan tilt zoom camera controller RS485 adapter

Economy Joystick Controller

PTZ Joystick for 220X Cameras

Keyboard controllers with joystick can control 32 high speed domes simultaneously, provides focus and iris control, set preset cruise and pan/tilt and zoom joystick control functions etc. Easily set, call, and cruise through presets. The LCD control keyboard is both easy to use and is an ideal solution which will compliment any surveillance system.

This joystick can easily control multiple PTZ cameras. You can set one camera to cruise, and then switch to another camera and use it manually while the first one is still cruising.

Features:

RS-485 port for CCTV system control.
Pelco D and Pelco P protocol
2400, 4800, 9600, 12800 baud rates
Built-in Joystick to control PTZ functions.
Preset position and cruise control.
Friendly user-interface.
Control max. 32 high speed dome cameras simultaneously.
64 presets available.
Support Zoom function

PTZ-KYBD220LT----Pan tilt zoom Joystick Controller for 220X Cameras----$269.65

RS-232 to RS-485 Adapter

Dimensions: 2 1/2" x 1" x 1/2"

If you are using a PTZ camera with a DVR or computer then you need this adapter. This allows you to connect the two PTZ control wires to your computer. It connects into a Com port on the back of your computer. You do not need this if you are using a keyboard or joystick-like controller.

SSC-RSadapt-----RS-232 to RS-485 Adapter-----$49.95

Camera Balun

Dimensions: 2" x 1/2" x 1/2" (each)

Baluns are designed to run video and PTZ control for up to 1000ft over Cat 5 cable. Power can also be run through the baluns over Cat 5, but for shorter distances. It is always best to locally power a PTZ cameras. These baluns can be used for regular cameras by running the power and video through Cat 5 or for PTZ cameras by running the power, video, and PTZ control through Cat 5.

Using baluns allow you to send video, power, and RS-485 PTZ control through regular Cat 5. Save time and money by using regular Cat 5 cable when installing cable. No need to run separate control wire. It can all be sent through standard Cat 5 cable. Baluns allow your cameras to be installed easier using your existing wiring. Connect a PTZ to a normal Cat 5 jack and view, control, and power it from another office through the existing wiring.

These baluns convert stadard cabling into twisted pair wiring. This allows easier and longer runs of cable. Run up to 1000ft of Cat 5 for your PTZ camera.

Note: These are only sold in pairs. Each quantity contains 2 (two) baluns.

Note: Power supply and Cat 5 cable not included

Features:

Passive (No power required)
Accomplish longer runs using Cat 5, up to 1000ft.
When running power through Cat 5 as well, the cable run distance will be reduced
Jack already on Balun. No Cat 5 wiring required
1 Year Warranty

SSC-PTZBalun---Set of PTZ Baluns---$39.95

PTZ-270XO Ceiling Mount Kit

This kit allows you to mount the 270X Outdoor PTZ hanging from a ceiling. The camera itself comes with wall mount bracket. If you want to have the unit hanging from rafters, a ceiling, etc, you will need this ceiling mount kit.

In addition to using the included 9" mount, this kit also allows you to use standard 1 1/4" PVC pipe for custom lengths. This is often what you find at large department or home improvement stores when they have cameras hanging 10 or 20 feet from the rafters.

SSC-CeilMount---Ceiling Mount Kit for Outdoor 270X Camera---$19.95

PTZ Accessories

Economy Joystick Controller

RS-232 to RS-485 Adapter

Camera Balun

PTZ-270XO Ceiling Mount Kit