Wall Clock With HD Hidden Camera

This working wall clock has a 1080p HD high definition hidden camera built inside.  The clock will have a wiring coming out the back of it to connect to a cable or your HD-CVI DVR.

Power Video Cable or CAT5

There will be a power video wire coming off the pinhole camera inside the wall clock that will  go into your wall and then it must run to your HD-CVI DVR. A person can also use CAT5 instead of our conventional power video cable. The CAT5 will be able to accommodate power and video by using video baluns. When using CAT5 cable you will only have to drill a 1/4 inch in your ceiling or ceiling tile to install this hard wired hidden camera.

Viewing And Recording Take Place Using a High Definition DVR

The technology in this high definition camera allows the user to select between CVI, TVI, AHD or analog.  This is what allows it to send uncompressed full HD video over regular video cable.  Because it is a special high definition interface it must be used with a high definition DVR.  You use traditional coax cable to run the camera to the DVR. The DVR has an HDMI output for connection to your HDTV. There is also a VGA output that can be used as well. Both video outputs can be used at the same time in order to enjoy mulitiple monitors in different locations. We have a 4 Channel, 8 Channel, and 16 Channel DVR available in our HD Standalone DVRs category.