CVI, TVI, AHD or 960H Video Format
The high definition hidden camera on this page is cross compatible with all 4 main video formats. There is a button on the camera cable that you can easily change the video format to accommodate your particular DVR.
Motion Detector Has HD Video Camera Inside
This normal looking motion detector has a 2.8mm extra wide view 2 megapixel HD 1080p camera inside of it. It uses normal coax cabling to connect to your High Definition DVR. The motion detector is non functional as far as part of your alarm system. It comes with a mounting bracket for easy installation to your wall or ceiling. Coming out of the motion detector is a small wire with a power and video jack.
Power Video Cable or CAT5
There will be a power video wire coming off the pinhole camera inside the motion detector that will go into your wall or ceiling and then it must run to your DVR. A person can also use CAT5 instead of our conventional power video cable. The CAT5 will be able to accommodate power and video by using video baluns. When using CAT5 cable you will only have to drill a 1/4 inch in your wall, ceiling or ceiling tile to install this hard wired hidden camera. With CAT5 you will be able to run wires up to 200 feet.
Print / Download Product Spec Sheet
|Sensor||1/2.9 inch SONY CMOS|
|Illumination||0.001 LUX / F1.2|
|Resolution||AHD/TVI/CVI: 2.4mp 1080P，Analog: 2000TVL|
|Scanning Frequency||50Hz 60Hz|
|Video Output||1.0V p-p Shift to TVI/CVI/CVBS by OSD|
|Operation Temperature||-20 ºC to 50 ºC|
|Working Humidity||less than 95%|
HD Motion Detector hidden camera
1amp AC power supply