HD Exit Sign Hidden Camera, 2 Sided, Full Functioning, HD Hard Wired Model
The camera is completely undetectable! The hardwired HD exit sign hidden camera provides a direct output connector for video to any HD-CVI DVR. This camera has an amazing 1080p HD picture. Very easy to install, just plug and play. Ideal for monitoring hallways, doorways, exits, entrances, etc.
The camera is 2 sided for the red EXIT
words. There are 2 models to choose from. One model with only 1 camera, and the other model with 2 HD color cameras.
The exit sign can only be top mounted or right side mounted for the 2 sided functionality. Otherwise it can be wall mounted for 1 side appearance.
The exit sign is still full functioning. We have added a camera/s and cable without hampering the functionality of the exit sign at all. The exit sign is powered by normal 110-120 volts AC. The camera/s operate on 12 VDC. Use 2 power video cables or CAT5 to get to your HD-CVI DVR.
Power Video Cable or CAT5
There will be a power video wire coming off the pinhole camera inside the exit sign that will go into your wall or ceiling and then it must run to your HD-CVI DVR. A person can also use CAT5 instead of our conventional power video cable. The CAT5 will be able to accommodate power and video by using video baluns. When using CAT5 cable you will only have to drill a 1/4 inch in your wall, ceiling or ceiling tile to install this hard wired hidden camera.
Viewing And Recording Take Place Using a High Definition DVR
The technology in this high definition camera allows the user to select between CVI, TVI, AHD or analog. This is what allows it
to send uncompressed full HD video over regular video cable. Because it
is a special high definition interface it must be used with a high definition
DVR. You use traditional coax cable to run the camera to the DVR. The DVR has an HDMI output for connection to your HDTV. There is also a VGA output that can be used as well. Both video outputs can be used at the same time in order to enjoy mulitiple monitors in different locations. We have a 4 Channel, 8 Channel, and 16 Channel DVR available in our HD Standalone DVRs category.
Print / Download Product Spec Sheet
Product Specifications and Features
|Wiring||Wires Directly Into 110-120VAC to power exit sign and camera|
|Package Includes||HD Exit Sign Hidden Camera|
25ft power video cable
|Sensor||1/2.9 inch SONY CMOS|
|Illumination||0.001 LUX / F1.2|
|Resolution||AHD/TVI/CVI: 2.4mp 1080P，Analog: 2000TVL|
|Scanning Frequency||50Hz 60Hz|
|Video Output||1.0V p-p Shift to TVI/CVI/CVBS by OSD|
|Operation Temperature||-20 ºC to 50 ºC|
|Working Humidity||less than 95%|
HD Exit Sign Hidden Camera
25ft power video cable