HD Emergency Light Hidden Camera Hard Wired
This fully functioning emergency light outputs 1080p HD high definition video. The light wires directly into 110-120VAC like a traditional emergency light would. The light is fully functional and will come on when power is lost. The video wire coming out of the emergency light is what you would connect to your HD-CVI DVR.
Power Video Cable or CAT5
There will be a power video wire
coming off the pinhole camera inside the emergency light that will go into your wall or ceiling and then it must run to your HD-CVI DVR. A
person can also use CAT5 instead of our conventional power video cable.
The CAT5 will be able to accommodate power and video by using video
baluns. When using CAT5 cable you will only have to drill a 1/4 inch in
your ceiling or ceiling tile to install this hard wired hidden camera.
Viewing And Recording Take Place Using an HD-CVI DVR
The technology in this camera is called HDCVI. This is what allows it
to send uncompressed full HD video over regular video cable. Because it
is a special high definition interface it must be used with an HDCVI
DVR. You use traditional coax cable to run the camera to the DVR. The DVR has an HDMI output for connection to your HDTV. We have a 4 Channel, 8 Channel, and 16 Channel DVR available in our HD Standalone DVRs category. This camera must be used with an HDCVI DVR.
Print / Download Product Spec Sheet
Product Specifications and Features
|Wiring||Wires Directly Into 110-120VAC to power emergency light and camera|
|Package Includes||HD Emergency Light Hidden Camera|
|Sensor||1/2.9 inch SONY CMOS|
|Illumination||0.001 LUX / F1.2|
|Resolution||AHD/TVI/CVI: 2.4mp 1080P，Analog: 2000TVL|
|Scanning Frequency||50Hz 60Hz|
|Video Output||1.0V p-p Shift to TVI/CVI/CVBS by OSD|
|Operation Temperature||-20 ºC to 50 ºC|
|Working Humidity||less than 95%|
HD Emergency Light Hidden Camera