Full Functioning Exit Sign Emergency Light Wireless Hidden Camera
Just power it up and the surveillance begins. The exit sign emergency light must be powered for the transmitter and camera to operate.
This operates completely normal and can be powered by 110-120 Volts. The hidden camera and 2.4ghz transmitter inside the sign are wired internally and connected to the 110-120 volt wiring. Once you wire the exit up, the entire product is ready for surveillance.
Day Night Low light Color Camera
We offer this product with a dual-mode color pinhole camera. The dual-mode utilizes our SSC-106CXCHR pinhole board camera listed below.
Just Power Up and Connect Your Receiver to TV or DVR
Wireless hidden cameras still require power. Some cameras use an AC power adapter to plug it in for power and some wire directly into 110VAC. You may also choose to use an optional rechargeable 12 volt battery on most models. To view the video, you must connect the included wireless receiver to a viewing or recording device within a couple hundred feet of the camera. You have two options for what you connect the receiver to.
- Connect the receiver to a Standalone DVR. This allow you to view, record, motion detection record, and view over the internet using your computer or smartphone.
- Connect the receiver to a TV for basic real
time viewing. This option only gives you real-time basic live viewing.
Print / Download Product Spec Sheet
|Name of Camera||SSC-106HHC Pinhole|
|Color||Day-Night Color B/W|
|Image Sensor||1/3" Color Sony Super HAD CCD II 960H|
|Lens Size||3.7 mm pinhole lens 85 degree Field of View|
|Lux||.01 LUX Color, .0001 LUX B/W|
|IR Compatible||Yes 850nm|
|IR Compatible||Optional 940-950nm|
|Curve Reproduction||Adaptive Tone Curve Reproduction|
|Effective Pixels||1020W X 508T|
|Shutter Speed||1/60 ~ 1/120,000 sec|
|S/N Ratio||More Than 45db|
|White Balance||Auto White Balance|
|Wide Dynamic Range||Yes|
|Back Light Compensation||Auto BLC|
Exit Sign Emergency Light Wireless Hidden Camera
AC power supply for wireless receiver