Exit Sign Emergency Light Fully Functional Hard Wired Hidden Camera With 2 CamerasThis hidden security system has 2 cameras built inside of it. The cameras are on opposite sides. It wires into normal 110VAC to power the exit sign and the emergency light. The exit sign/emergency light is completely full functioning as normal. The 2 hidden pinhole cameras are wired completely separate from the factory wiring.
Uses Cat 5 CableOne run of CAT5 cable is all you need to connect both cameras to DVR and power. Since CAT5 cable has 4 pair of wire we use 1 pair for video for each camera and 1 pair for power for each camera. No need to run RG59 or any other cumbersome cable for 2 cameras.
In addition to the 2 cameras, there are also 2 video baluns inside the sign to properly connect the CAT5. Everything is pre-wired inside the unit.
Print / Download Product Spec Sheet
|Name of Camera||SSC-106HHC Pinhole|
|Color||Day-Night Color B/W|
|Image Sensor||1/3" Color Sony Super HAD CCD II 960H|
|Lens Size||3.7 mm pinhole lens 85 degree Field of View|
|Lux||.01 LUX Color, .0001 LUX B/W|
|IR Compatible||Yes 850nm|
|IR Compatible||Optional 940-950nm|
|Curve Reproduction||Adaptive Tone Curve Reproduction|
|Effective Pixels||1020W X 508T|
|Shutter Speed||1/60 ~ 1/120,000 sec|
|S/N Ratio||More Than 45db|
|White Balance||Auto White Balance|
|Wide Dynamic Range||Yes|
|Back Light Compensation||Auto BLC|
2 Camera Model Exit Sign Emergency Light Hidden Camera
Top Mount Bracket
CAT5 Cable NOT Included
AC power supply to power both cameras