Dual mode board camera, 540 lines resolution. Automatic switching between a high resolution crystal clear color picture in normal lighting to a B&W picture when it gets dark. You will not find another board camera that will be this high quality color in daylight and automatically switching to a super low lux of .001 black and white picture in the dark. This camera has a 1/3 inch Sony Super HAD CCD with and IR cut filter to allow for the low lux ability.
This 106CXC, 106CXF and the 106CXB series cameras are compatible with 850nm and 940nm infrared illumination. Adding an infrared illuminator to your application will seem like someone turned on a light. Our 940nm infrared emitters are virtually invisible to the naked eye. This means the room can be pitch black and the intruder will not be able to see the infrared illuminator or the camera, but the camera will see the room as if a light bulb was on.
When it gets dark most color cameras will just lose their picture and go black. The IR filter in this camera will allow it to continue to have a picture in B/W until it gets extremely dark.
All of our board cameras are plug and play ready. This means there is already a short wire connected to the camera which simply plugs into the included power supply for power and your TV or VCR to view and/or record.
The Super Conical lens option allows for the absolute smallest hole for for installation. It does not matter whether you are building your own hidden camera, putting this in drywall or ceiling tile, all that has to be exposed is just the tip of the lens. The flat lens is better if you need the overall camera dimensions thinner or if you are putting the camera up behind something very thing, like cloth.
This camera can operate using the included AC power supply or from any of our battery packs if you are requiring short term surveillance without a wall outlet nearby for power.
This camera can easily transform into a wireless covert camera by connecting it to a transmitter. The wireless option on this page includes the transmitter as well as the receiver. The transmitter also operates on 12 volts just like the camera, so you can power both from batteries if you must.
Dimensions: 1 1/8" x 1 1/8" x 3/4"